How to Customise Your Watch Band: Logos, Prints, Embroidery and Packaging
"Can you put my logo on it?" That is the first question in most of the custom orders we receive, and it is usually followed by three more: how will the logo look, how long will it last, and what is the smallest quantity I can order.
This guide answers those questions method by method, so you can choose the right customisation for your strap before you ask for a sample. Every method below is one we actually offer. Where a number depends on your exact design and quantity, I say so plainly instead of giving a figure that does not apply to your order.
The Six Ways to Make a Strap Yours
There is no single best way to add a logo. The right method depends on the strap material, where the logo should sit, and how the strap will be used.
| Method | Where It Goes | Best For | Minimum Order |
|---|---|---|---|
| Laser engraving | Metal buckle, connector bar or clasp | A clean, permanent mark on metal parts | From 1 piece |
| Embroidery | Woven and nylon straps | A raised logo or text you can feel on fabric | From 1 piece |
| Corrosion etching | Metal parts | A marked logo on metal with a different finish from engraving | From 1 piece |
| Sewn woven label | Strap body | A brand label stitched onto the strap | From 1 piece |
| Custom printing | Woven and silicone straps | Full artwork, patterns, text or photos across the strap | Quoted per design |
| Custom packaging | Boxes and display boxes | Retail-ready presentation for your brand | Quoted per order |
Standard custom work, laser engraving, embroidery, corrosion etching and a sewn woven label, can be done from 1 piece. A fully new strap shape that needs a brand-new mould is different: that needs a 1,000-piece minimum order, which I explain in the mould section below.
Laser Engraving: The Cleanest Logo on Metal
Laser engraving marks the logo directly into the metal of the buckle, the connector bar or the clasp. There is no ink and nothing stuck on top, so there is nothing to peel or rub off in normal use.
It suits metal parts best: the clasp of a Milanese mesh band, the connector bar of a woven strap, or a metal buckle. It also suits a small, simple logo or a short line of text, because the mark is fine and precise.
Send us the logo artwork and tell us which metal part it should go on. We confirm the size and the placement with you before the sample is made, because a logo that looks right on a screen can be too small once it is on a clasp.
Embroidery: A Logo You Can Feel
Embroidery stitches the logo or text into the fabric of a woven or nylon strap with thread. It is raised, so you can feel it, and it reads clearly even from a distance.
It suits fabric straps best, and it suits a bold logo, a short brand name or a simple symbol. Fine detail and very small text are harder in thread than in print, so a simple design usually comes out better.
Thread colour is part of the design. It can match the strap for a quiet look, or contrast with it so the logo stands out. Tell us which effect you want when you send the artwork.
Corrosion Etching and Sewn Woven Labels
These two methods are easy to overlook, and both are useful when engraving or embroidery does not fit the design.
Corrosion etching marks metal parts with a chemical etch instead of a laser. The result is a marked logo with a different finish from engraving, and it suits buyers who want a softer or more textured mark on a metal part.
A sewn woven label is a small fabric label carrying your brand name or logo, stitched onto the strap body. It is the same kind of label you see on clothing, and it suits buyers who want a visible brand mark on a fabric strap without printing or stitching the logo directly into the strap.
Both methods are standard custom work and can be done from 1 piece, like engraving and embroidery.
Custom Printing: Your Artwork on the Strap
Custom printing puts your own artwork across the strap: a pattern, a picture, a line of text, team colours or a full repeating design. It is the most flexible method, because the print can cover the strap instead of sitting in one small spot.
It works on woven nylon straps and on silicone straps. Our own clock-print woven strap, with a clock face and the words "Who cares I'm already late", is one example of a printed design, and it is made in 25 colours. Buyers have also asked us for team colours, patterns and their own artwork on woven straps.
Send artwork that you own or have the right to use, and tell us how it should sit on the strap. We confirm how the design prints on the material before the sample is made, because a design that works on a flat image can sit differently once it wraps around a strap.

Colours: Pick from the Chart or Send Your Own
Customisation is not only the logo. The strap colour is part of your brand too, and it is worth choosing it at the same time as the logo method, not after.
Our nylon woven range runs to 37 numbered colours on one chart, from black and grey through red, blue, green and pink. Our silicone printing chart shows 26 colours. Leather straps come in patterned finishes such as crocodile, lizard, snakeskin and ostrich, each in many colours: one crocodile-pattern range alone is shown in 22 colours.
If your brand has its own colour, send it with the artwork and we will match the closest colour in the range. If you need an exact brand colour rather than the closest match, tell us early, because it can affect the sampling time.


From One Piece to a New Mould
Customisation falls into two groups, and the minimum order is different for each.
| Customisation | Minimum Order | Sampling | Lead Time |
|---|---|---|---|
| Standard custom work: laser engraving, embroidery, corrosion etching, sewn woven label | From 1 piece | Generally $50 to $70, 15 to 20 days | Ordinary bulk orders generally 10 to 20 days |
| Custom printing | Quoted per design | Generally $50 to $70, 15 to 20 days | Ordinary bulk orders generally 10 to 20 days |
| Fully new strap shape with a brand-new mould | 1,000 pieces | A mass-production MIM mould is about 20,000 RMB; stainless-steel part CNC sampling is about $150 | Generally 25 to 40 days, depending on how smoothly the mould is made |
As a rough guide, 20 to 50 pieces run about $10 to $15 per piece, with each higher quantity tier about $1 less per piece. The exact price depends on the design, the material and the quantity, so send those details for a real quote.
A sample with your logo on it is the step I always recommend before a bulk order. It shows you the real size, the real colour and the real finish of the logo, not a picture of it. Check the sample on the actual device it is made for, not just in your hand, because fit and comfort only show up once the strap is on the wrist.
Ordering for a Store, a Brand or a Team?
Not everyone reading this is ordering for themselves. Some buyers are retailers building an accessory collection. Others run a fitness brand, a sports club, or are developing a new screenless device and need straps made to their own specification.
What matters when the strap carries your brand
When I discuss a wholesale or OEM/ODM order, I usually begin with the brand, not the price. Where does the logo go, and which method suits it? What colours does the brand use? Does the buyer need custom packaging, and does the order need a new mould or an existing design?
At WhoopStrap.com, we work with OEM and ODM accessory projects for WHOOP, Google Fitbit Air, Garmin and other screenless devices. Depending on the design and manufacturing requirements, these projects may involve selected materials, colours, logos, packaging, and custom hardware.
We sign NDAs with customers as a matter of course, so your design stays yours. Custom packaging should be decided before the sample stage, not after, because it affects both the cost and the lead time. And the straps are made in our own factory in Dongguan: 108 people, 10 production lines, about 350,000 straps a month, with RoHS, REACH, EN71, CE and ISO 9001 certification.
| Customisation Question | Why to Confirm It Early |
|---|---|
| Logo method | Engraving, embroidery, etching, woven label or print: each suits a different material. |
| Logo placement | Buckle, connector, clasp or strap body: it decides the size and the method. |
| Strap colour | Pick from the colour chart or send your brand colour with the artwork. |
| Packaging | Polybag or custom printed box, and is it retail-ready? |
| New mould or existing design | A new shape needs 1,000 pieces; an existing design can start from 1 piece. |
| Sample | Can the logo be checked on the actual device before bulk production? |
| Order quantity | What quantities are practical for the selected design? |
Frequently Asked Questions About Custom Watch Bands
What is the minimum order for a custom logo?
Standard custom work, laser engraving, embroidery, corrosion etching and a sewn woven label, can be done from 1 piece. Custom printing is quoted per design. A fully new strap shape that needs a brand-new mould needs a 1,000-piece minimum order.
Can I send my own design or artwork?
Yes. Send the artwork you own or have the right to use, and tell us where it should go on the strap and how large it should be. We confirm the size, the placement and how it prints on the material before the sample is made.
Which logo method lasts longest?
Engraving and etching mark the metal itself rather than sitting on top of it. Embroidery is thread stitched into the fabric. Printing sits on the surface of the strap. Which one suits your order depends on the material and on how the strap will be used, so tell us the use and we will suggest the method.
Can I get a sample with my logo before the bulk order?
Yes. A sample generally costs $50 to $70 and takes 15 to 20 days. Check the sample on the actual device it is made for, and confirm the logo size, colour and placement before the bulk order starts.
Can you do custom packaging?
Yes. Custom printed boxes and display boxes are available, and they should be decided before the sample stage, because packaging affects both the cost and the lead time.
Do you sign an NDA for my design?
Yes. We sign NDAs with customers as a matter of course, so a design you send us stays yours.
One Last Thought Before You Order
A logo is a small part of a strap, and it is the part your customer sees first. Choose the method for the material, not for the picture: engraving for metal, embroidery or a woven label for fabric, printing when the design needs to cover the strap.
Send the artwork, the strap material, the quantity and the device model in your first message, and tell us where the logo should go. With those details, we can suggest the right method, confirm the minimum order and make a sample that shows the real result, instead of a guess.
If you are ready to start, send us your logo, your design and your quantity, and we will walk through the rest with you, one step at a time.
Explore custom watch bands and OEM/ODM options at WhoopStrap.com
WhoopStrap.com is an independent accessory supplier and is not affiliated with WHOOP. WHOOP is a trademark of its respective owner. Check product compatibility before ordering.
